Accepted for Publication / In Press
Kernicky, T., Whelan, M.J., and Al-Shaer, E. (201x) “Vibration-based Damage Detection with Uncertainty Quantification by Structural Identification using Nonlinear Constraint Satisfaction with Interval Arithmetic,” Structural Health Monitoring, Accepted for Publication.
2018
Kernicky, T., Whelan, M.J., and Al-Shaer, E. (2018) “Dynamic Identification of Axial Force and Boundary Restraints in Tie Rods and Cables with Uncertainty Quantification using Set Inversion Via Interval Analysis,” Journal of Sound and Vibration, Vol. 423, 401-420.
Whelan, M.J., Salas, N., and Kernicky, T. (2018) “Structural Identification of a Tied Arch Bridge using Genetic Algorithms and Ambient Vibration Monitoring with a Wireless Sensor Network,” Journal of Civil Structural Health Monitoring, Vol. 8, No. 2, 315-330.
2017
Kernicky, T., Whelan, M.J., Rauf, U., and Al-Shaer, E. (2017) “Structural Identification using a Nonlinear Constraint Satisfaction Processor with Interval Arithmetic and Contractor Programming,” Computers and Structures, 188, 1-16
Goyal, R., Whelan, M.J., and Cavalline, T. (2017) “Characterizing the effect of external factors on deterioration rates of bridge components using multivariate proportional hazards regression,” Structure and Infrastructure Engineering 13(7), 894-904
Gangone, M.V., Whelan, M.J., and Janoyan, K.D. (2017) “Effect of Sensor System Noise and Load Positioning on the Precision of Load Testing and Rating of Highway Bridges: A Case Study,” Journal of Structural Integrity and Maintenance, 2(4), 234-248
2016
Whelan, M.J., Ralston, A.D., and Weggel, D.C. (2016) “Blast Testing of Cold-Formed Steel Stud Wall Panels,” Journal of Performance of Constructed Facilities, 30(2), 04015008.
2015
Whelan, M.J., Tempest, B.T., and Scott, D.B. (2015) “Post-Fire Nondestructive Evaluation of a Prestressed Concrete Double-Tee Joist Roof,” Journal of Performance of Constructed Facilities, 29(2), 04014055
Kernicky, T.P., Whelan, M.J., Weggel, D.C., and Rice, C.D. (2015) “Structural Identification and Damage Characterization of a Masonry Infill Wall in a Full-Scale Building Subjected to Internal Blast Load,” Journal of Structural Engineering, 141(1), D4014013
Whelan, M.J. and Gangone, M.V. (2015) “Effect of Measurement Uncertainties on Strain-Based Damage Diagnostics for Highway Bridges,” Journal of Civil Structural Health Monitoring, 5(3), 321-335.
Ralston, A.D., Weggel, D.C., Whelan, M.J., and Fang, H. (2015) “Experimental and Numerical Investigations of Glass Curtain Walls Subjected to Low-Level Blast Loads,” International Journal of Computational Methods and Experimental Measurements, 3(2), 121-138
2014
Whelan, M.J., Tempest, B.T., and Scott, D.B. (2014) “Influence of Fire Damage on the Modal Parameters of a Prestressed Concrete Double-Tee Joist Roof,” Structural Control and Health Monitoring, 21(11), 1335-1346.
Gangone, M.V., Whelan, M.J., Janoyan, K.D., and Minnetyan, L. (2014) “Development of Performance Assessment Tools for a Highway Bridge Resulting from Controlled Progressive Monitoring,” Structure and Infrastructure Engineering, 10(5), 551-567.
2013
Kunwar, A., Jha, R., Whelan, M.J., and Janoyan, K.D. (2013) “Damage Detection in an Experimental Bridge Model Using Hilbert-Huang Transform of Transient Vibrations,” Structural Control and Health Monitoring, 20(1), 1-15.
2012
Whelan, M.J. and Janoyan, K.D. (2012) “Assessment of Simplified Linear Dynamic Analysis of a Multi-Span Skew Bridge on Steel-Reinforced Elastomeric Bearings,” Journal of Bridge Engineering, 17(1), 151-160.
Gangone, M.V., Whelan, M.J., Janoyan, K.D., and Minnetyan, L. (2012) “Experimental Characterization and Diagnostics of the Early-Age Behavior of a Semi-Integral Abutment FRP Deck Bridge,” Sensor Review 32(4), 296-309.
2011
Whelan, M.J., Gangone, M.V., Janoyan, K.D., and Jha, R. (2011) “Operational Modal Analysis of a Multi-Span Skew Bridge Using Real-Time Wireless Sensor Networks,” Journal of Vibration and Control, 17(13), 1952-1963.
Gangone, M.V., Whelan, M.J., and Janoyan, K.D. (2011) “Wireless Monitoring of a Multi-Span Bridge Superstructure for Diagnostic Load Rating and System Identification,” Computer-Aided Civil and Infrastructure Engineering 26(7), 560-579.
Gangone, M.V., Whelan, M.J., and Janoyan, K.D. (2011) “Deployment of a dense hybrid wireless sensing system for bridge assessment,” Structure and Infrastructure Engineering, 7(5), 369-378.
2010
Whelan, M.J. and Janoyan, K.D. (2010) “In-Service Diagnostics of a Highway Bridge from a Progressive Damage Case Study,” Journal of Bridge Engineering 15(5), 597-607.
Whelan, M.J., Gangone, M.V., Janoyan, K.D, Hoult, N., Middleton, C.R., and Soga, K. (2010) “Wireless Operational Modal Analysis of a Multi-Span Prestressed Concrete Bridge for Structural Identification,” Smart Structures and Systems 6(5-6)
2009
Whelan, M.J., Gangone, M.V., Janoyan, K.D., and Jha, R. (2009) “Real-Time Wireless Vibration Monitoring for Operational Modal Analysis of an Integral Abutment Highway Bridge,” Engineering Structures 30(10), 2224-2235
Whelan, M.J., Gangone, M.V., Janoyan, K.D., and Jha, R. (2009) “Highway Bridge Assessment using an Adaptive Real-Time Wireless Sensor Network,” IEEE Sensors 9(11), 1405-1413.
Whelan, M.J. and Janoyan, K.D. (2009) “Design of a Robust, High-Rate Wireless Sensor Network for Static and Dynamic Structural Health Monitoring,” Journal of Intelligent Material Systems and Structures 20(7), 849-863.
2008
Whelan, M.J., Fuchs, M.P., and Janoyan, K.D. (2008) “Large Scale Remote Sensing for Environmental Monitoring of Infrastructure,” Journal of Environmental Monitoring, 10, 812-816.
Special Publications
Gangone, M.V., Whelan, M.J., and Janoyan, K.D. (2008) “Structural Health Management of Concrete Structures using Wireless Sensors,” Health Monitoring Systems and Sensors for Assessing Concrete American Concrete Institute (ACI) Special Publication (SP-252) Los Angeles, CA, April.
Whelan, M.J. and Janoyan, K.D. (2007) “Real-Time Embedded Sensing for Process Monitoring and Quality Control in the Lost Foam Casting Process,” Transactions of the American Foundry Society (AFS)
Whelan, M.J. and Janoyan, K.D. (2007) “Development of a Wireless Predictive Maintenance Sensor Network for the Lost Foam Casting Process,” Transactions of the American Foundry Society (AFS)